【2 Port PoE Extender】With 10/100Mbps speed, this 2 port PoE extender include 2 PoE out and 1 PoE in, running one cable to power 2 POE IP devices.
【IEEE 802.3 af/at】This POE Repeater complied with IEEE 802.3 af/at, Input Max 30W, Output Max 24W. PoE Voltage 38-57 Vdc. PoE pin: Input, 1/2 (-), 3/6 (+), 4/5(+), 7/8(-); Output: 1/2 (+), 3/6 (-).
【Port Isolation】Fixed VLAN for port isolation,it can be connected with two cameras at the same time and will not interfere with each other. Make the surveillance system more secure and efficient.
【More 250Meters Extension】The front access distance is 100 Meters for transmission,rear access supports one click Extend extension for 250 Meters.Meet your network security monitoring requirements and ensure stable transmission.
【For Surveillance System】The PoE Extender is easy to setup with no software installation or configuration required.Perfect for Security Camera CCTV Surveillance,greatly extending the network signal transmission as well as power supplying distance.
【Compact size】The POE repeater is compact and wall-mounted, does not take up much space and is easy to install in all corners.
SL-SWTG124AS:📖(Click here)
SL-SWTGW215AS:📖(Click here)
SL-SWTGW218AS:📖(Click here)
SL-SWTGW2216AS:📖(Click here)
SL-SWTGW2224AS:📖(Click here)
SL-SWTGW2C8F:📖(Click here)
SL-SWTG3C12F:📖(Click here)
SL-SWTG3DE48A6S:📖(Click here)
SL-2444SGMP-400:📖(Click here)
SL-AFGW-242S-400:📖(Click here)
SL-SG008W:📖(Click here)
SL-SG0024W:📖(Click here)
SL-SWTGW2C80N:📖(Click here)
SL-SWTGW0108P:📖(Click here)
Unzip the package and use the bin firmware inside to upgrade it.The firmware upgrade takes about five minutes, do not interrupt the upgrade and perform other operations during this time, otherwise it can easily cause the system to crash
Please Attention:
1. Do not power down during the upgrade process
2. After the upgrade is completed, restart the system
3. Clear IE cache and log in again
The configuration will be lost after upgrade. If you want to back up the configuration, please refer to the following methods:
1: Complete the configuration or save it before upgrading the firmware. Path: tools > save; the configuration will not be lost after the upgrade. 2: Backup the settings, export the configuration file and save it, upgrade to a new version, and then re-import the configuration file for recovery. Path: Tools > Configuration Backup