【4 Port 65W Gigabit PoE】4*Gigabit PoE Ports(802.3at/af)&2* Gigabit Ethernet Uplinks,With built-in power supply 65W, Sodola makes PoE Switch easier to use.
【PoE Watchdog】AI Watchdog intelligent detection automatically reboot the disconnected and unresponsive PoE-powered devices.
【VLAN Mode】The PoE ports (1-4) of the switch cannot communicate with each other, and can only communicate with the UP-link port to reduce the network congestion effectively when the VLAN mode on.
【Link Extension Mode】Ports 1-4 support extend mode, the transmission distance of POE ports can be extended to 250m with a speed of 10M when it’ s enabled.
【4KV Lightning Protection】SODOLA PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable. General Mode 4KV, Differential Mode 2 KV, ESD 8KV(Air),6KV(Contact).
【Plug and Play】Easy setup with no software installation or configuration needed.Moreover,We committed to provide product- replace- without- repair service within 1 year, more concern on your using experience.
SL-SWTG124AS:📖(Click here)
SL-SWTGW215AS:📖(Click here)
SL-SWTGW218AS:📖(Click here)
SL-SWTGW2216AS:📖(Click here)
SL-SWTGW2224AS:📖(Click here)
SL-SWTGW2C8F:📖(Click here)
SL-SWTG3C12F:📖(Click here)
SL-SWTG3DE48A6S:📖(Click here)
SL-2444SGMP-400:📖(Click here)
SL-AFGW-242S-400:📖(Click here)
SL-SG008W:📖(Click here)
SL-SG0024W:📖(Click here)
SL-SWTGW2C80N:📖(Click here)
SL-SWTGW0108P：📖(Click here)
- SL-SWTG124AS:1.9 Version Download (Click here)
- SL-SWTGW215AS:1.9 Version Download (Click here)
- SL-SWTGW218AS:1.9 Version Download (Click Here)
- SL-SWTGW2216AS: No update
- SL-SWTGW2224AS:No update
- SL-SWTGW2C8F:F11124 Version Download(Click here) Please clear your browser cache before the firmware update
- SL-SWTG3C12F:No update
- SL-SWTG80NC:No update
- SL-AFGW-242S-400:6.7 Version Download(Click here)
- SL-SG008W:No update
- SL-SG0024W:No update
- SL-SWTGW2C80N:No update
Unzip the package and use the bin firmware inside to upgrade it.The firmware upgrade takes about five minutes, do not interrupt the upgrade and perform other operations during this time, otherwise it can easily cause the system to crash
Please Attention:
1. Do not power down during the upgrade process
2. After the upgrade is completed, restart the system
3. Clear IE cache and log in again
The configuration will be lost after upgrade. If you want to back up the configuration, please refer to the following methods:
1: Complete the configuration or save it before upgrading the firmware. Path: tools > save; the configuration will not be lost after the upgrade. 2: Backup the settings, export the configuration file and save it, upgrade to a new version, and then re-import the configuration file for recovery. Path: Tools > Configuration Backup