| SL-AFGR-21+ |
- 【1 in 2 out PoE Extender】The SODOLA Gigabit PoE Extender Repeater features a 1 in 2 out design, which means you can connect one PoE source to the extender and power two devices simultaneously.
- 【IEEE 802.3 af/at】This POE Repeater complied with IEEE 802.3 af/at, Input Max 30W, Output Max 25W. PoE Voltage 38-57 Vdc. PoE pin: Input, 1/2 (-), 3/6 (+), 4/5(+), 7/8(-); Output: 1/2 (+), 3/6 (-).
- 【Extended Reach of 250 Meters】With an initial front-end transmission of 100 meters, our Gigabit PoE extender offers a one-click 250-meter extension, fulfilling your network security surveillance demands. Note that when the 250-meter extension mode is activated, the network speed will drop to 10 Mbps for consistent and reliable performance.
- 【4KV Lightning Protection】Equipped with robust 4KV lightning protection, this PoE Passthrough Switch for Security Systems IP Camera safeguards your network against potential damage from electrical storms, ensuring uninterrupted and secure operation even in adverse weather conditions.
- 【For Surveillance System】The gigabit PoE Extender is easy to setup with no software installation or configuration required.Perfect for Security Camera CCTV Surveillance,greatly extending the network signal transmission as well as power supplying distance.
- 【Compact size】The POE repeater is compact and wall-mounted, does not take up much space and is easy to install in all corners.
SL-SWTG124AS:📖(Click here)
SL-SWTGW215AS:📖(Click here)
SL-SWTGW218AS:📖(Click here)
SL-SWTGW2216AS:📖(Click here)
SL-SWTGW2224AS:📖(Click here)
SL-SWTGW2C8F:📖(Click here)
SL-SWTG3C12F:📖(Click here)
SL-SWTG3DE48A6S:📖(Click here)
SL-2444SGMP-400:📖(Click here)
SL-AFGW-242S-400:📖(Click here)
SL-SG008W:📖(Click here)
SL-SG0024W:📖(Click here)
SL-SWTGW2C80N:📖(Click here)
SL-SWTGW0108P：📖(Click here)
SL902-SWTGW218AS：📖(Click here)
SL902-SWTGW124AS：📖(Click here)
SL902-SWTGW215AS：📖(Click here)
SL510S-4T2XS：📖(Click here)
SL510S-5T：📖(Click here)
SL-SWTGW2C48NS：📖(Click here)
SL-AXGW-SWTG2224AS：📖(Click here)
- SL-SWTG124AS:No update(1.9 and above)
- SL-SWTGW215AS:No update(1.9 and above)
- SL-SWTGW218AS:No update(1.9 and above)
- SL-SWTGW2216AS: HRRF_F11132_SL-SWTGW2216AS_0210_en(Click here)
- SL-SWTGW2224AS:HRRF_F11132_ SL-SWTGW2224AS_0210_en(Click here)
- SL-SWTGW2C8F:HRRF_F11129_SL-SWTGW2C8F_1118_en(Click here)
- SL-SWTG3C12F:No update
- SL-SWTGW2C80N:HRRF_F11132_SL-SWTGW2C80N_0212_en.(Click here)
- SL-AFGW-242S-400:6.7 Version Download(Click here)
- SL-SG008W:No update
- SL-SG0024W:No update
- SL-SWTGW2C48NS:HRRF_F11134_SL-SWTGW2C48NS_0221_en(Click here)
- SL902-SWTGW215AS:No update
- SL902-SWTGW124AS:No update
- SL902-SWTGW218AS:No update
- SL510S-4T2XS:No update
- SL520S-5T1XS:No update
- SL520S-5T1XS-150:No update
- SL510S-5T:No update
- SL-SWTGW0108P:No update
- SL-AXGW-SWTG2224AS:No update
-
-
Please be advised that the firmware versions of these switches have undergone multiple upgrades and changes. Attempting to skip versions during upgrades may pose a risk of system crash. Products purchased recently typically come with the latest firmware version. Kindly refrain from downloading firmware versions from other sources and upgrading without authorization. Before each upgrade, you may take a screenshot of the switch's current firmware version and send it to our after-sales email at support@sodola-network.com for consultation.
Unzip the package and use the bin firmware inside to upgrade it.The firmware upgrade takes about five minutes, do not interrupt the upgrade and perform other operations during this time, otherwise it can easily cause the system to crash
Please Attention:
1. Do not power down during the upgrade process
2. After the upgrade is completed, restart the system
3. Clear IE cache and log in again
The configuration will be lost after upgrade. If you want to back up the configuration, please refer to the following methods:
1: Complete the configuration or save it before upgrading the firmware. Path: tools > save; the configuration will not be lost after the upgrade. 2: Backup the settings, export the configuration file and save it, upgrade to a new version, and then re-import the configuration file for recovery. Path: Tools > Configuration Backup